Chiniot Furniture BazaarChiniot Furniture Bazaar
arrow_backBlog

How to Check Original Sheesham Wood Before Buying Furniture

Chiniot Furniture Bazaar • 1 November 2026

To check original sheesham wood before buying furniture, follow the grain to the edge, lift the piece, knock for a dense sound, notice its natural woody smell, and inspect the underside, back and drawer insides. Original sheesham is heavy, continuous in grain and consistent even where photographs rarely show the finish.

Quick Answer: Check the grain at the edge, the weight, the knock sound, the smell and the hidden parts. Original sheesham feels dense and consistent throughout, while imitations often reveal seams, board, lighter weight or a different material underneath.

How can you follow the grain to the edge?

Start with a clear grain line on the top or front of the piece and follow it slowly with your finger. On solid sheesham, that pattern should reach the edge and continue naturally around it. The side may show the grain from a different angle, but it should still look like the same living timber rather than a picture that suddenly stops.

A seam at the edge needs a question. Veneer is a thin layer over another material, so its surface pattern cannot continue through the thickness of the board. Edge strips can also look slightly different in tone or texture. This is the same principle explained in our guide to solid sheesham versus veneer furniture: follow the material through the piece, not only across the polished front.

What does the weight test tell you?

Sheesham is a dense hardwood, so a solid piece should feel substantial for its size. Lift one corner of a table, raise a chair carefully, or compare two similar pieces side by side. A piece that feels unexpectedly light may contain more board, thinner material or a lighter wood than the front suggests.

Use weight as a clue, not a verdict. The lift test works best comparing similar-sized pieces, combined with the grain and sound checks.

What should sheesham sound like when you knock it?

Knock gently with your knuckles on the top, then on a side or leg. Solid, dense timber gives a firm, dull, compact sound. A hollow or lighter sound can suggest a thin panel or lower-density core. Try different parts — legs and frames should sound solid — and combine this with the other checks.

What does original sheesham smell like?

Real timber has a natural, dry woody smell, especially inside a drawer or cabinet, where fresh polish covers it less. It should smell like wood, not strongly chemical or damp and sappy like green timber. Smell is a supporting test, not proof — combine it with grain, weight and hidden construction.

How should polish behave on real sheesham?

Polish should bring out the grain, not hide it. Look in natural light and from an angle: on real sheesham you still see variation and depth beneath the finish. If the pattern looks flat, perfectly repeated or printed, look closer. Never put a water drop on a finished showroom piece without permission — the safer check is visual: consistent finishing on edges and hidden parts, with no peeling or sudden change of material.

Where should you check that photographs do not show?

The most honest parts of furniture are often the least photographed. Check these areas before you decide:

  • The underside of tables, beds and chairs
  • The back panel of wardrobes, consoles and cabinets
  • Drawer sides, drawer bottoms and the inside of doors
  • Joints where legs meet rails and where frames are fixed together
  • The bottom edges where a different material is easiest to hide

In person, turn a small piece over or ask the showroom to show you these areas. Online, ask for clear photos or a live look at the back and underside. You can browse Chiniot showrooms and contact a showroom directly to request those views before travelling.

How can you tell seasoned wood from unseasoned wood?

Seasoning is the drying that prepares timber before cutting and joining. Poorly dried wood can warp, crack or loosen at the joints in your home. Warning signs include gaps at joints, uneven drawers, deep end cracks or doors that do not sit square. Ask how the timber was dried — our furniture wood seasoning guide explains the process, and a good workshop answers specifically.

What imitations should you watch for?

The common problems are not always complete fakes. Often only part of the piece is different from what the buyer expects:

  • A thin veneer surface over engineered board sold with the impression that the whole piece is solid
  • Kikar or another timber mixed into less visible parts without being stated clearly
  • A softer wood stained dark to imitate the colour of sheesham
  • A polished front with board, rough material or unfinished construction hidden at the back

Naming every species by eye is difficult. Your protection is the tests plus clear answers: ask which parts are solid sheesham and whether any timber has been mixed — before you agree the order.

What questions should you ask the showroom?

Ask direct questions and listen for direct answers:

  • Is this piece solid sheesham throughout, and if not, which parts are different?
  • Has any kikar, softwood, board or veneer been used in this piece?
  • How was the sheesham seasoned before the furniture was built?
  • Can I see the underside, back and drawer insides?
  • Can the piece be sanded and re-polished if it is scratched in future?
  • If I order this design, will the same wood and construction be used?

Honesty about a secondary part, explained plainly, is very different from hiding it. What matters is that the main structure matches what you were told.

Why does checking matter more before a made-to-order order?

Chiniot workshops can build from a reference image — a real strength — but that means the wood is chosen before you see the finished piece. Agree timber, solid parts, finish and size at the start; the free DesignMandi tool helps with design and room fit. When the piece is ready, repeat the same checks before accepting it.

Frequently Asked Questions

What is the quickest test for original sheesham wood?

Follow the grain to the edge. On solid sheesham, the grain continues naturally around the edge and onto the side. If the pattern stops at a seam or the edge looks like a separate strip, ask whether the surface is veneer.

Does heavy furniture always mean original sheesham?

No. Weight is a strong clue because sheesham is dense, but design and thickness also affect weight. Use the lift test together with the grain, sound, smell and underside checks rather than relying on weight alone.

How can I tell sheesham from kikar?

Compare grain, colour and finish carefully and ask the showroom to state the wood clearly. Mixed or substituted timber can be hard for a beginner to name with certainty, so a seller who answers directly and shows hidden parts matters.

Should I check the inside of drawers when buying furniture?

Yes. Drawer insides, backs and undersides show the material and workmanship that front photographs hide. Real wood, tidy construction and consistent finishing in hidden areas are good signs, while raw board or rough shortcuts need questions.

Why does seasoned wood matter when checking sheesham?

Seasoned wood has been dried before building, so it is less likely to crack, warp or loosen at the joints. Unseasoned wood can look fine in the showroom and still move later as it dries in your home.

Can I check the wood before ordering a made-to-order piece?

Yes, and you should. Agree the wood, the solid parts and the finish before work begins, ask about seasoning, and inspect grain, edges and hidden parts when the piece is ready before accepting it.

Factory Rates on WhatsApp

Like the designs? Talk directly to a Chiniot showroom — no middlemen.

Contact on WhatsApp

Browse Chiniot Furniture Showrooms

Explore 59 real showrooms from Chiniot's furniture market — browse their designs and contact any showroom directly on WhatsApp.

View All Showrooms
chat

Facing an issue on the website?

Contact us — we're here to help.